I saw someone wearing a similar version of this cute no-sew shrug, so it's not my original idea, but that shrug was made from an adorable, designer label t-shirt with a fancy finished collar and sleeves, while this one started out as a cheapo blank long-sleeved t-shirt that I got at the craft store for $3.

The first step was getting rid of the icky collar and cuffs, which I carefully cut off close to the stitch line and then stored in a sandwich bag for some future project.



Next I measured to find the center line of the shirt and drew in a chalk cutting line, I also drew in a bit of a V-neckline at the top by measuring three inches down the center line and three inches off the center along the neckline.  For the tie strips I measured over two inches off the center line, and up ten inches from the hemline - which I later changed to nine inches as you can see from my chalk lines.  I would recommend that you try on the shirt before doing any marking and figure out how short you want the final shirt to be, then mark it with chalk or a pin, so that you don't have to move the shirt around once you've got it nice and flat and have started marking.

 
The final step is to cut along the lines - you should cut the horizontal lines first, over to the mark for the ties, then along the outer tie lines up to the new hem, and then lift the ties to finish cutting the back hemline.  Now you can lift the shirt if you want to finish cutting the centerline.  There is no need to finish the edges since they won't unravel and they'll roll up quite nicely after washing.  If I can find a pink long sleeved t-shirt, I might just go to the extra effort of finishing it with a lettuce edge using the serger.

It's been getting cool in the mornings and I've been LOVING having this shrug to throw on when I run my kindergartner to school.  Unfortunately the hubby's been hiding all his shirts since I've been on the prowl for another that I can cut up and keep in the car for chilly days and the rare trip to Waffle House